Bond Safe 680 – Above Ground Pools


In stock


SKU: 116105 Category:

Product Description

Bond Safe 680 was invented in order to bond pool water in accordance with the National Electrical Code (NEC) 680.26(C) which states “Pool water shall have an electrical connection to one or more of the bonded parts described in 680.26(B). Where none of the bonded parts is in direct connection with the pool water, the pool water shall be in direct contact with an approved corrosion-resistant conductive surface that exposes not less than 5800 mm2 (9 in.2) of surface area to the pool water at all times. The conductive surface shall be located where it is not exposed to physical damage or dislodgement during usual pool activities, and it shall be bonded in accordance with 680.26(B).” Bond Safe 680 adheres to this code by bonding the pool water. As the code reads, the product must be placed somewhere out of harms way and made of non-corrosive material. Because Bond Safe 680 is made of stainless steel and placed on the side wall of the skimmer, below the skimmer basket it is both non-corrosive and out of the way. Bond Safe 680 is easy to install, the instructions (included) for the above ground pool model contains only 5 easy to follow steps. The product can be installed in a matter of minutes. Bond Safe 680 is packaged with all the hardware necessary to mount the plate. Upon mounting, the electrician will only need to attach the bonding wire for the pool to be bonded. Bond Safe 680 will create a safer environment for swimmers and will not interfere with normal pool activity and operation. Patent pending and Underwriters Laboratories (UL) listed.

Additional Information

Weight 4 lbs
Dimensions 10 × 10 × 10 in


There are no reviews yet.

Be the first to review “Bond Safe 680 – Above Ground Pools”